Porter-cable 352VS Manuel d'utilisateur

BELT SANDERPart No. A00111 - 12-09-03ESPAÑOL: PÁGINA 15FRANÇAISE : PAGE 31InstructionmanualThe Model and Serial No. plate is located on the mainhousin

107. Do not pause in any one spot during the sanding operation. The belt willeat into the work and make the surface uneven.8. Lift the tool from the w

11DOORS AND MILL WORKWhen sanding doors, cabinet frames, sash, storm windows and screens, takecare to avoid working into the cross grain where one mem

12KEEP TOOL CLEANPeriodically blow out all air passages with dry compressed air. All plastic partsshould be cleaned with a soft damp cloth. NEVER use

13ACCESSORIESA complete line of accessories is available from your Porter-Cable ·Delta Supplier, Porter-Cable · Delta Factory Service Centers, andPort

14PORTER-CABLE LIMITEDONE YEAR WARRANTYPorter-Cable warrants its Professional Power Tools for a period of one year from the date of originalpurchase.

The following are trademarks of PORTER-CABLE •DELTA (Las siguientes son marcas registradas de PORTER-CABLE •DELTA S.A.) (Lesmarques suivantes sont des

2Some dust created by power sanding, sawing, grinding, drilling, and otherconstruction activities contains chemicals known (to the State of California

322. Avoid body contact with grounded surfaces such as pipes,radiators, ranges and refrigerators. There is an increased risk ofelectric shock if your

45. Store idle tools out of reach of children and other untrainedpersons. Tools are dangerous in the hands of untrained users.6. Maintain tools with c

5SYMBOL DEFINITIONV ... voltsA ... amperesHz ... hertzW ... wattsk

64. WORK IN ONE ROOM AT A TIME. Furnishings should be removed orplaced in the center of the room and covered. Work areas should besealed off from the

7If an extension cord is to be used outdoors it must be marked with the suffixW-A or W following the cord type designation. For example – SJTW-A toind

NOTE: Some sanding belts are bi-directional. These belts will not havearrows printed on them. They can be installed to run in either direction.5. Enga

9ATTACHING AND CARE OF DUST BAGDepress the spring clips (A) Fig. 4 ofthe dust bag (B) and clip the dustbag over the rib of the dust spout(C).For the m