Porter-cable 892459-0011 Manuel d'utilisateur

Double Insulated7" Disc Sander7" PolisherThe Model and Serial No. plate is located on the mainhousing of the tool. Record these numbers in t

104. TO REMOVE: DISCONNECT TOOL FROM POWER SOURCE, graspedge of the buffing pad (or compounding pad) and “peel” away from back-up pad, engage spindle

11MAINTENANCEKEEP TOOL CLEANPeriodically blow out all air passages with compressed air. Remove buildupof grime resulting from working with green or sa

ACCESSORIESThe testing of this tool has been accomplished with the use of the followingaccessories ONLY. For safest operation, it is recommended that

The following are trademarks of PORTER-CABLE ·DELTA Corporation (Las siguientes son marcas registradas de PORTER-CABLE • DELTAS.A.) (Les marques suiva

2IMPORTANT SAFETY INSTRUCTIONSWARNING: When using electric tools, basic safety precautions shouldalways be followed to reduce the risk of fire, electr

38. DRESS PROPERLY. Do not wear loose clothing or jewelry. Looseclothing, draw strings and jewelry can be caught in moving parts. Rubbergloves and non

4ADDITIONAL SAFETY RULES FOR DISC SANDERS & POLISHERS1. ALWAYS disconnect the cord plug from the power circuit beforechanging abrasive discs, pile

5the United States Bureau of Mines. These masks and replaceable filters arereadily available at major hardware stores. Be sure the mask fits. Beards a

6THE BASIC MACHINESAUXILIARY HANDLEAn Auxiliary Handle is supplied with this tool and can be mounted on eitherside of the gear housing. This handle sh

7SWITCHA trigger switch (A) Fig. 4, with lock button (B) Fig. 4, is conveniently locatedin the machine handle. To start machine, depress switch trigge

Fig. 68SPINDLE LOCKA spindle lock (A) Fig. 5 islocated on the right side of thegear case. To Operate: Depressspindle lock pin with thumbwhile rotating

9USING DISC SANDER1. CAUTION: Secure work to prevent it from moving during the sandingoperation. Friction between the sanding disc and work will try t